Working Principle:
This product is designed to crank for power to charge its built-in lithium battery via a specified charging circuit. The energy stored is used as the power supply of flashlight and charger.
Functions:
1. Cranking for power generation.
2. Charge mobilephones.
3. Connect with a fixed bracket can be used as the bicycle light.
4. The battery has self-protection function.
Features:
1. High efficiency: 1 minute cranking can make 3 LEDs light for more than 10 minutes.
2. High Luminance: the Max. brightness is 60000 Mcd.
3. Perfect charging effect: 3 minutes charging can make cellphone talk for 2-8 minutes.
4. Mini size, convenient to carry.
5. Ergonomic design, with many rubber pieces make it comfortable to use.
6. It can use as both flashlight and bicycle light, practicable and well-suited.
Main Technical Parameters:
Charge for mobilephone:
1. Voltage Output: 5.8V or 6.4V
2. The Max. current output: ≥400 MA
3. The Max. power output: 2.5 W
4. 3 minutes charging can make cellphone talk for 2-8 minutes.
Used as flashlight:
1. The Max. brightness is 60000 Mcd.
2. 1 minute cranking can make 3 LEDs light for more than 10 minutes.
Lifespan:
1. The whole unit: > 5 years
2. The charging plug: > 5000 times
3. LED: > 50000 hours
4. The Plastic part: >5 years
Operation Method:
Used as light:
1. Loosen the screws on the bracket, unclench the “ouch” and fixed it on the bicycle.
2. Unlock the handle, crank it at the speed of 2 circles per second for about one minute. Lock the handle again and insert it into the bracket.
3. Press the switch, the light will be on, the model is: 1 LED on—off—3 LEDs on—off .
4. It can be used as torch also.
Charge for mobilephone:
1. Insert one end of the charging cable into the mobilephone, and the other end into this product.
2. Unlock the handle, crank it clockwise at the speed of 2-3 circles per second to charge.
Cautions:
1. Fully insert the plug into the socket, otherwise it possibly leads to circuit shut off.
2. Crank it as even as possible (keep rotating steady). Too slowly cranking would make current weak and prolong the charging time, and too violent cranking possibly damages the power transferring system.
3. Pay attention to the holding gesture when cranking so as not to hurt your fingers.
4. Do not place this product in where temperature or humidity is high .
5. This product may not fully charge a mobilephone.
6. Strictly use the cable that our company specifies to charge the specified mobilephones , or it will possibly damage the mobile phone or its battery .
7. In order to prolong the using life of the battery,crank it at least once a month for more than 1 minute .
8. Screw down the holder, otherwise the flashlight maybe drop.
Size: 141*56*98.5 mm
Weight: 198 g
|
|
|
|
|
